User Instructions - English
5
3.0 Installation
The ManHandler Hoist/Winch is equipped with a built-in bracket for attachment to approved
anchorage systems and devices, such as the Miller DuraHoist™ Confined Space System and
Miller Tripods, Quad Pods, Davit Systems, Wall Mounts, etc.
To install the ManHandler Hoist/Winch, simply align the holes on the built-in mounting bracket
with the holes on the mounting device being used (i.e., tripod or other approved anchorage) and
insert the push pins completely through the bracket (see Fig. 1 & 2).
The ManHandler Hoist/Winch must be inspected before each use as described in section 4.1
Inspection and Operation of this manual.
TYPICAL
INSTALLATION
Fig. 2
MILLER MANHANDLER
MOUNTED TO
MILLER TRIPOD
MOUNTING BRACKET
CRANK HANDLE
HOUSING
SWIVEL SNAP HOOK
PUSH PINS
Fig. 1
WARNING:
$OZD\VHQVXUHWKDWWKHVQDSKRRNRDQGOHUXQLWLVSURSHUO\VH
-
FXUHGWRDFRPSDWLEOHFRQQHFWLRQVXFKDVDZRUNHU¶VKDUQHVVEDFN'ULQJDQGLVFORVHG
DQGORFNHGZKHQLQXVH,QGHSHQGHQWIDOOSURWHFWLRQPXVWEHXWLOL]HGLDQGOHU
+RLVW:LQFKLVEHLQJXVHGWRUDLVHORZHUSRVLWLRQRUVXVSHQGSHUVRQQHOLQDQRQHPHU
-
JHQF\VLWXDWLRQ$0LOOHUUHWUDFWDEOHOLIHOLQHRUD0LOOHUUHWUDFWDEOHOLIHOLQHZLWKUHFRYHU\
capabilities is recommended.
www.actoolsupply.com
www.actoolsupply.com
