17
Page 17
MI Modem
Verification (DOS)
To verify that the installation of the integral modem was successful
and the instrument is working properly, obtain a modem link with
the instrument using ER-Link or AT-Link DOS software package.
Start either the AT-Link or ER-Link (depending on the type of unit the
modem was installed in). Select
Computer on the main menu line
and press Enter.
With
Computer Communication highlighted, press Enter. Insure
that the
Modem Baud Rate is set for 2400 baud. Check to see if the
correct
Modem Port is selected and that it matches the port on the
computer.
Next move to the
Transfer selection on the main menu line and press
Enter. Select
Modem Link from the sub-menu options and press
Enter. Enter the Site Phone Number and press Enter.
If the modem was installed correctly, the
NOT LINKED message
located in the lower left-hand corner of the computer screen will
change to
MODEM LINK.
Verification (Windows)
To verify that the installation of the integral modem was successful
and the instrument is working properly, obtain a modem link with
the instrument using ER-Link or AT-Link for Windows software
package.
Start either the AT-Link or ER-Link (depending on the type of unit the
modem was installed in). Select
Setup on the main menu line, then
click on
Site List.
