Honeywell LXL-1000 User Manual Download | Manualshive

Page: 9 / 64

background image

– 9 –

About The Keypads

General Information

Your keypads allow you to control all system functions and are activated by pressing
any numbered key. Your keypads feature the following:

•

A telephone style (digital) keypad

•

Liquid Crystal Displays (LCD) that show the nature and location of all occurrences

•

Built-in sounder that sounds during alarms and troubles. The sounder also "beeps"

during certain system functions and also when depressing any of the keys (to
acknowledge the key press).

•

Backlighting of the LCD display windows. Backlighting turns on when any key is

pressed or when entering the premises through any assigned entry/exit door. This
feature is helpful when a keypad is located in a dimly lit area.

•

Some keypads have a voice feature that announces the nature and location of all

system occurrences. Voice keypads also announce any faulted entry/exit or
perimeter zone when Chime mode is on. Ask your installer if this option has been
programmed for your system.

IMPORTANT:

If the keypad beeps rapidly upon entering the premises, it indicates that an

alarm has occurred during your absence and an intruder may still be on the premises.
LEAVE IMMEDIATELY and CONTACT THE POLICE from a nearby safe location.

Your keypads are functionally the same, but may have different types of displays, depending
on the type installed with your system.

Alpha Display

2-line alpha display keypads feature a 2-line, 32-character
alphanumeric LCD that displays system messages in friendly
English. These keypads can also be programmed with custom zone
descriptors.

Fixed-Word Display

Fixed-Word display keypads are functionally identical to Alpha
display keypads, but the LCD display uses pre-designated words to
identify the nature and location of occurrences.

Voice Keypads

Voice Keypads (if installed), are functionally the same as other
keypads, except that these keypads can provide the following:

•

Voice announcements of system status (see

Checking for Open

Zones

section)

•

Voice chime, which can alert you to the opening of doors and

windows while the system is disarmed (see Voice Chime in

Chime

mode

section)

•

Message center, which lets you record and playback

messages (see Using the Voice Message Center in the

System Overview

section).

www.PDF-Zoo.com

«
...
7
8
9
10
11
...
»

Summary of Contents for LXL-1000

































































Reviews:

No comments

Related manuals for LXL-1000

Interlogix 60-875 Simon

Brand: GE Pages: 40

Brand: GE Security Pages: 2

BL-C1A - Network Camera

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 40

Brand: Panasonic Pages: 56

Brand: Panasonic Pages: 8

Brand: Samsung Pages: 77

Brand: Abus Pages: 162

Brand: Abus Pages: 82

Brand: Abus Pages: 88

Brand: Abus Pages: 2

Brand: Abus Pages: 119

Brand: Bacharach Pages: 24

SET-2000 Oil/Sludge

Brand: Labkotec Pages: 14

Brand: Magellan Pages: 68

Brand: Magellan Pages: 2

Brand: Magellan Pages: 52

Brand: Magellan Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands