Honeywell LXL-1000 User Manual Download

Page: 50 / 64

– 50 –

Regulatory Statements and Warnings

UL NOTICE: This is a "Grade A" residential system.

WARNING: This is a Class A product. In a domestic environment, this product may cause
radio interference in which case the user may be required to take adequate measures.

RADIO FREQUENCY EMISSIONS

Federal Communications Commission (FCC) Part 15

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Industry Canada

This Class B digital apparatus complies with Canadian ICES-003.
Cet Appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

TELEPHONE/MODEM INTERFACE

FCC Part 68

This equipment complies with Part 68 of the FCC rules. On the front cover of this equipment is a label that contains

the FCC registration number and Ringer Equivalence Number (REN). You must provide this information to the

telephone company when requested.

This equipment uses the following USOC jack: RJ31X

This equipment may not be used on telephone-company-provided coin service. Connection to party lines is subject

to state tariffs. This equipment is hearing-aid compatible.

Ringer Equivalence Number Notice:

The

Ringer Equivalence Number

(REN) assigned to each terminal device provides an indication of the maximum

number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist

of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of
all the devices does not exceed 5.

www.PDF-Zoo.com

Summary of Contents for LXL-1000

































































Search results

Summary of Contents for LXL-1000

Reviews:

Related manuals for LXL-1000

Brands by name

Popular brands

Honeywell LXL-1000, User Manual

Search results

Summary of Contents for LXL-1000

Reviews:

Related manuals for LXL-1000

Brands by name

Popular brands