Limitless™
WDRR Receiver
Issue 1,
50063987
www.honeywell.com/limitless
10
3.2
COUNTRY USE CODE “B” ANTENNA OPTIONS
Table 12 – Country Use Code B Antenna Options
COUNTRY CODE B
Antenna
Type Code
(allowed for
use)
Integral Mount
Antennas
(allowed for use)
Remote
Mount
Antennas
(allowed for
use)
Magnetic Remote
Mount Assemblies/
Antenna
WAMM100RSP-005
(allowed for use)
Magnetic Remote
Mount Assemblies/
Antenna
WAMM100RSP-010
(allowed for use)
Extension Cable
Assemblies/Antennas
for Remote Mount
WCA200RSJRSP-005
WCA200RSJRSP-010
WCA200RSJRSP-015
WCA200RSJRSP-020
(allowed for use)
00
WAN01RSP
WAN03RSP
WAN01RSP
WAN01RSP
WAN01RSP
01
WAN02RSP
WAN09RSP
WAN02RSP
WAN02RSP
WAN02RSP
02
WAN07RSP
WAN10RSP
WAN07RSP
WAN04RSP
WAN03RSP
03
WAN08RSP
WAN08RSP
WAN07RSP
WAN07RSP
05
WAN08RSP
WAN08RSP
10
WAN09RSP
11
WAN10RSP
WAN11RSP
Integral mount:
Antennas have an RP-SMA plug that connects directly to the WDRR RP-SMA jack
Remote mount:
Remote mount antenna uses a cable with a RP-SMA plug that connects directly to the WDRR RP-SMA jack
ATTENTION
If using the WDRR in a portable application (for example, the WDRR is used in a handheld device
and the antenna is less than 20 cm from the human body when the device is in operation): The
integrator is responsible for passing additional SAR (Specific Absorption Rate) testing based on FCC
rules 2.1091 and FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields,
OET Bulletin and Supplement C. The testing results will be submitted to the FCC for approval prior to
selling the integrated unit. The required SAR testing measures emissions from the module and how
they affect the person.
Notes for Section 3.1& 3.2 Tables 11 and 12:
1.
Antennas listed in this chart are approved for use with the Digi International XBee –PRO
®
RF Module which the WDRR
utilizes.
2.
Industry Canada Compliance Statement: This device has been designed to operate with the antenna types listed in this
document, and having a maximum gain of 9 dBi. Antenna types not included in this list or having a gain greater than 9
dBi are strictly prohibited for use with this device. The required antenna impedance is 50 Ohm.
