Revision 2 Nov/2002
KMD 550/850 FIS Addendum
39
7. Turn the inner knob clock-
wise to select a G as shown
in Figure 50. The desired
location is now displayed
because it is the first instance
in the database with a G in
this field.
To Scan for Location
Name:
Sometimes, only a portion of
the airport name may come
to mind. The following
example shows scanning for
EAGLE GROVE MUN when
EAGLE is the only portion of
the name remembered.
1. Repeat Step 1 through 6
of the previous procedure.
2. Press the KNOB SCAN
softkey. The Control Knob
label will now display SCAN .
The knob label will now show
SCAN as in Figure 51.
3. Turn the outer knob clock-
wise until the cursor is posi-
tioned as in Figure 51.
4. Turn the inner knob to
sequence through all the
location names in the data-
base beginning with EAGLE.
stopping at the desired name
as in Figure 52.
NOTE: This same method
may be used with the name
of the city where the airport is
located.
This method is also used to
choose the desired airport
among those of identical names, but located in different cities.
Figure 50
Figure 51
Figure 52
Normal Operation
KMD 550/850 FIS PG R2 11/21/02 5:34 PM Page 39