
Revision 2 Nov/2002
KMD 550/850 FIS Addendum
23
Normal Operation
NEXRAD PAGE OPERATIONAL CONTROLS
CAUTION: NEXRAD data must only be used for strategic planning
purposes. Due to inherent delays and relative age of the data that
can be experienced, NEXRAD data cannot be used for tactical
avoidance of weather.
MODE - Toggles between Graphical METARs and
NEXRAD.
Joystick - Moving the joystick allows panning of
the map and placement of the pointer over the
desired weather activity to be viewed.
RNG
▲
/
RNG
▼
- Displays ZOOMING TO ### nm and
advances the indicator to the next range. The upper
button increases range, the lower button decreases it.
The selected range is displayed in the lower left corner
of the display with the outer range ring the displayed
range and the inner range ring is half the displayed
range. The RNG button labels will not be displayed when their respec-
tive range limits are reached.
OVLY - Allows selection of flight plan and lightning data
(if Stormscope™ equipment is installed) for overlay on
the FIS map.
USING THE NEXRAD PAGE
1. Press the WX Function
Select Key until the FIS
Graphics Page is displayed.
If necessary, press the
MODE Key to obtain the
NEXRAD Base Reflectivity
display as shown in Figure
19. NEXRAD Base
Reflectivity will be displayed
in the MODE field located at
the top center of the display.
Figure 19
KMD 550/850 FIS PG R2 11/21/02 5:34 PM Page 23