1-57
Rev 2 Apr/2004
KMD 250 Pilot's Guide
Section 1
Basic Operation
1.
Select the destination as
discussed in the Direct-To pro-
cedure.
2.
Press the
OBS COURSE
Softkey shown in Figure 1-101.
This will display the
OBS
COURSE
window as shown in
Figure 1-102.
NOTE: Unless using OBS
Course Mode within an active
flight plan, Auto
Leg
Sequencing (see Appendix A)
will be disabled.
3.
The course field will be
highlighted. Use the Rotary
Knob to select the desired
OBS course. If desired, the
Joystick can be used to select
the destination identifier in
order to enter a new destina-
tion. Turn the Rotary Knob to
display the
WAYPOINT
ENTRY
window.
4.
Press the
ACTIVATE
Softkey and the route will be
displayed on the Map as
shown in Figure 1-103.
NOTE: When OBS Mode is
active, pressing the Direct-To
Key will display the active
OBS
COURSE
window.
To change the OBS course to
a Direct-To route press the the
Direct-To Key to display Figure 1-102. Press the
DIR TO
Softkey and a
Direct-To will be selected for the current identifier. Press the
ACTIVATE
Softkey to enter and display the Direct-To route.
To center the CDI, from the
OBS COURSE
window (Figure 1-102) press
the
DIR TO
Softkey then press the
OBS COURSE
Softkey. The CDI will
now be centered.
Direct-To Operation
Figure 1-101
Figure 1-102
Figure 1-103
Summary of Contents for KMD 250
