3. Add or Edit the Camera(s) in AlarmNet Direct
You will need the following information:
AlarmNet Direct account with user name and password.
Account number and MAC ID for the GSM, iGSM or internet communications device.
MAC ID for each camera. The MAC ID is on the box.
NOTE: If you are installing multiple cameras and they get separated from their boxes, the last 6
digits of the MAC ID is also on the back of the camera (Server Name).
6. From this screen you can add a camera by entering the VIDEO MAC ID (located on the box
and on the back of the camera).
7. In the Video Device Name field, enter a friendly name for the camera such as; kitchen, porch,
garage, etc.
8. Click
Add Video Device
.
NOTE: You can also edit an existing camera by clicking
Edit/Delete
in the Action column. This
will allow you to change the Video Device Name, or simply delete that camera.
9. Save and close, then log out of AlarmNet Direct.
The cameras are now ready for customer use.
Have the customer log into their Total Connect account to view the video.
If their PC does not have QuickTime
®
and Flash
®
Player, you will be prompted to install or
update these applications.
If any of the cameras were mounted upside down, there is a setting to upright the image.
At this time the location of each camera can be adjusted for the desired view.
NOTE: When adding, editing, or deleting a camera, the customer will receive email notification.
1. Log into AlarmNet Direct.
https://services.alarmnet.com/AlarmNetDirect/
2. Click
Show Programmed Devices GSM/I
.
3. Search for the communications device by entering the customer Account # or the MAC ID of
the communications device. Then click
Search
.
4. Ensure the account is active and enabled for Remote Services. This can be determined by
looking at the status icons.
NOTE: If the account is not properly configured, refer to the online help and configure the account.
5. In the Actions column, use the drop-down menu to select
Video-Configure
. Then click
GO
.
TRADEMARKS
Honeywell is a registered trademark of Honeywell International Inc.
Flash is a registered trademark of Adobe Systems Incorporated, registered in the U.S. and other countries.
QuickTime is a registered trademark of Apple Inc., registered in the U.S. and other countries.
Ê800-04431V2ÆŠ
800-04431V2 5/10 Rev. A
2 Corporate Center Drive, Suite 100
P.O. Box 9040, Melville, NY 11747
Copyright
2010 Honeywell International Inc.
www.honeywell.com/security
WARRANTY
For the latest warranty information go to:
http://www.security.honeywell.com/hsc/resources/wa/
Account must be
registered.
Must have.
The last 6 digits of the MAC ID is also on
the back of the camera.
