IntuVueRDR-7000 Weather Radar Pilot's Guide
D201911000094 Equipment
Description
Rev 0, Feb 2020
37
provided, select ground override by pushing the HZD button four
times within 3 seconds. If either side selects ground override, normal
radar operation will commence. To return to Forced Standby, deselect
ground override on the control panel, if such a control is
available,orselect the standby radar mode. If both sides selected
ground override, then it will have to be deselected on both sides to
return to FSBY.
Test
: When on the ground, runs the full system self-test. Displays a
test pattern, followed by configuration information, and a report of
any faults found. If in the air, only the test pattern, configuration, and
current fault information is shown. (See
TURN ON AND TEST
on
page 9.)
FP (Flight Plan):
The FP position puts the radar systemin the
flightplan mode, which clears the screen of radar data so ancillary
datacan be displayed.Display ranges out to 1,000 nm are available. In
this mode, the radar continues to scan to keep the 3D memory filled
so that the most up to date weather information is always available.
The Weather Ahead (TGT) function is active, if installed. If installed,
predictive windshear detection is active. If a windshear event is
detected and PWS annunciations are not inhibited, the radar will
provide both aural and lamp or text annunciations, depending on the
installation.Change to any weather mode to see the windshear icons
that identify the location of the threat. The icons will remain on the
weather display until the event has dissipated. (See
WINDSHEAR
ALERT REGIONS
on page 24.)
DISPLAY SELECTION
WX ALL
– Automatic Weather Mode. Both On Path and Off Path
weather are shown. Off Path weather returns are shown with black
stripes through them. This mode provides display of weather out to
320 nm. If the Turbulence, REACT, and/or Hazard Display features
are selected, those will also be shown. The Weather Ahead (TGT)
function is active, if installed. If the predictive windshear feature is
installed, windshear events up to 5 nm in front of the aircraft will be
indicated.
