Honeywell Internet Connection Module Setup Manual Download Page 14

Page: 14 / 18

Technical Support

Setup - Guide

- Page 14 of 18 -

Diagnostics

The Diagnostics page shows the complete list of all devices that have been discovered
on the network, including devices that are currently offline. The main diagnostic
page lists a table of information about all the ICMs on the network.

Figure 6 - Diagnostics

The fields on the diagnostic page include:

Node #

- The node number or ICM number, based on the order the ICMs were

installed on the network.

Name –

The name of each ICM, based on the first device attached to the ICM.

– The IP address assigned to the ICM.

MAC

– The Media Access Control address assigned to this ICM by the manufacturer.

Home

– This indicates if the ICM is responding to “home” or “in2home” from a local

web browser. If the ICM is also running a DHCP server, the column will also contain
“DHCP”.

Type

– This indicates the node type and manufacturer.

Status

– This shows whether the device is online or offline.

Summary of Contents for Internet Connection Module



















Search results

Summary of Contents for Internet Connection Module

Reviews:

Related manuals for Internet Connection Module

Brands by name

Popular brands

Honeywell Internet Connection Module, Setup Manual

Search results

Summary of Contents for Internet Connection Module

Reviews:

Related manuals for Internet Connection Module

Brands by name

Popular brands