Technical Support
Setup - Guide
- Page 12 of 18 -
Save Settings
Once the setup is complete, you must save the changes to make sure everything
works as configured after the ICMs are restarted. All the setup changes are stored in
RAM, which is erased when power is removed from the ICM. The save process
compresses the new configuration and copies it to flash memory on the ICM where it
will be saved permanently, and reloaded when the ICM powers up.
Click the Save button to save your changes. This will cause all ICMs on the network
to save changes, and will cause the system to be unresponsive for at least 20 seconds
and as long as three minutes depending on the amount of data and graphic images on
the ICMs.
Figure 5 - Save settings
Caution
: If you do not save the setup, the changes you made will be lost when the
ICMs lose power.
