4
Quick Heat
®
will propel a steady blast of warm air out of your baseboard. This can help heat your room
more quickly. You will hear a fan operating in this mode. You can also turn the Quick Heat
®
setting off
and the heater will operate silently.
QUICK HEAT
®
FEATURE
This heater is equipped with several devices and features for added
protection.
• A high temperature safety control prevents overheating
(Hi Limit).
• A back-up thermal circuit breaker that will permanently shut down
the heater should it operate at higher than normal temperatures
(HZ-614, HZ-615, HZ-617 and HZ-817 only).
• A SafeGuard
™
Alert Heat Indicator Badge that indicates the grille is
hot and should not be touched - turns from black to red (HZ-614C,
HZ-617, HZ-617C and HZ-817 only).
• Tip-over switch feature - The HZ-817 SERIES ONLY is equipped
with a tip-over switch that disables the heater if it is tipped over.
To restore power to the heater, stand the heater up properly and
press the power button.
• A three-prong grounded plug.
• This heater was created using a high quality safety plastic.
SAFETY FEATURES
Fig. 4
Heat Indicator
Badge
Do not touch the grille until the
unit has been turned off and
the SafeGuard
™
Alert Badge has
turned back to black.
HZ-817 SERIES OPERATION (CONTINUED)
• The LOW setting ( ) is designed to operate only if the temperature is below 55°F (12°C). If the room
temperature is above 55°F (12°C), the heater will remain OFF until the temperature drops below this
level. If you want the heater to operate when the room is above 55°F (12°C), then move the Thermostat
to a higher setting.
• To override the Energy Smart™ feature and produce maximum heat, turn the knob fully clockwise to
HIGH ( ). This will produce 1500W of heat at all times.
Summary of Contents for HZ-614 series
Page 20: ...20 ...
