2
YOUR
HUMIDIFIER
:
SET
-
UP
:
Note: We recommend that the humidifier be
disinfected prior to first use. Please see
WEEKLY CLEANING instructions.
• Select a firm, level and flat location. For
proper air flow, locate the unit at least six
inches (15 cm) from any wall. Place the
humidifier on a water resistant surface, as
water can damage furniture and some flooring.
Honeywell will not accept responsibility for prop-
erty damage caused by water spillage.
FILLING
:
• Remove the Tank from the Power Unit.
• Turn the Tank over and unscrew the Cap.
• Fill the Tank with cool water.
• Reinstall the Cap. Do not overtighten.
• Install the Tank back onto the Power Unit.
OPERATION
:
POWER
MODE: SET HUMIDITY
POWER
MODE
45
%
Tank
Water Tray
Base
Power Unit
Medicine
Cup
Cap
High Power
Low Power
Continuous Run
• Press the Power button once to start the humidifier on
High Power, Continuous Run.
• Press the Power button a second time to change to
Low Power, Continuous Run.
• Press the Power button a third time to turn the humid-
ifier
OFF
.
Set Humidity
• Press the Mode button until the Set Humidity icon
blinks. The desired Humidity Level will be displayed.
• Use the Up and Down arrow buttons to set a desired
humidity level between 40% to 85%.
• After the desired humidity level is set, the Humidity
Level icon will stop blinking and the current room
humidity will appear.
• The humidifier will turn off shortly after the desired
humidity level is reached and the Power light above
the display will blink.
• The humidifier will turn back on when the humidity
level drops below the desired humidity level. The
Power light will stop blinking and remain lit.
