Chapter 2 - Planning
format (typically 1024X768 at a refresh rate of 60Hz). A multisync monitor is required for the HP ProLiant
DL360p Gen8 server operating system. The HP ProLiant DL360p Gen8 server can be configured only
with a single screen option. In this configuration, the monitor is connected to the integrated video output
connector.
Note that this server is not provided with the touch screen option
2.6.21
Video cable
A correct system startup and operation of the HP ProLiant DL360p Gen8 server requires an industry
standard VESA DDC interface with the monitor. If a monitor or video cable that does not support DDC is
attached to the Server Platform, the display generator will default to a resolution, which precludes
communication with the system software and stops startup. A quick check to determine if a cable is
DDC—compatible is to check that pins 5, 9 and 12 of the HD15 connector are wired. The IS supplied
cable (51196742-200) is DDC compatible.
To use a front video adapter, the customer needs to buy an HP DP to VGA dongle (P/N 655519-B21).
For more information, click
to access the Hewlett Packard customer support center.
2.7
Industrial regulatory compliance
The compliance specifications in this section apply to cabinet installations.
WARNING
Honeywell does not claim Safety Compliance or Electromagnetic Compatibility (EMC)
Compliance for system equipment configurations that have not been described in this guide as
standard system configurations. Any equipment configuration other than that described in this
publication decertifies the Safety and EMC compliance of this product.
l
l
2.7.1
Electromagnetic Compatibility
The following table provides the Electromagnetic Compatibility (EMC) specifications (Industrial
Regulatory) for European community.
Element
Description
Emissions
EN 61326-1:2006 (Industrial Locations, CISPR 11, Class A)
Immunity
EN 61326-1:2006 (Industrial Locations)
- 23 -