Description
HON 5020 gas pressure regulator with HON 630 pilot
10
For the location of the nameplates, as well as a detailed list of the information on them and
what it means, please refer to:
Identifying the device
(see page 10)
Small labels must be used to color-
code and explicitly name the gas pressure regulator’s
connection lines (measuring impulse lines and operating lines) based on what the lines are
intended for and their minimum nominal size.
2.4
Identifying the device
Make sure you have the right manual for your gas pressure regulator.
Use the nameplates to identify the gas pressure regulator.
Make sure that the on-site conditions match the information on the nameplates and the
technical specifications.
Technical specifications
(see page 16)
The type plate of the actuator assembly can be found here:
Figure
No.
Meaning
1
Front of the actuator assembly
For
actuator assembly models that use the metric system
, the information on the name-
plate will be as follows:
Figure
No.
Meaning
1
Model name
2
Manufacturer
3
Nominal size
4
Serial number of the device
5
Valve seat diameter
6
Device version
(IS = version with integral overpressure
protection)
7
Standard (EN
334)
8
Manufacturing date (month/year)
9
Connection
10
Temperature range
11
Failure function (fail-open)
12
Maximum allowable pressure
13
Maximum allowable inlet pressure
Nameplates
Labels on connection
lines
Identifying the gas pres-
sure regulator
Verifying the technical
specifications
Locating the type plate of
the actuator assembly
Interpreting the type
plate of the actuator
assembly
