Ultra HD IP Camera User Guide
32
Configuring DDNS Settings
You can configure Dynamic DNS (DDNS) settings on the
Setup > Network Setup > DDNS
page.
You can use a DDNS service to track and update your camera’s dynamic IP address, so that
even when the numeric IP address changes the DDNS address always remains the same.
To access your camera using a DDNS service:
1.
Register an account with a supported DDNS service, such as DynDNS or Honeywell’s
free DDNS service (www.hennvr-ddns.com).
2.
Select the
Server Type
check box.
3.
Select your DDNS service from the
Server Type
drop-down list.
4.
In the
Domain Name
field, enter the domain name (hostname) that you registered with
the DDNS service (for example,
mycamera
.dyndns.org).
5.
In the
User Name
and
Password
fields, enter the user name and password of the
account that you registered in step 1.
6.
In the
Update Period
field, enter the interval in minutes between address updates sent
to the DDNS server.
Note
If you selected Honeywell DDNS as your DDNS service, the domain name is set
to the camera’s MAC address by default and no user name or password are
required. Set
Mode
to
Auto
or
Manual
. If you configure the domain name
manually, click
Test
to verify that the domain name is registered.
7.
Click
Save
to apply the settings. You can now access the camera by entering the
domain name in your browser’s address bar.
