Honeywell HMBL8GR1, User Manual

Page: 28 / 95

Ultra HD IP Camera User Guide
18
DWDR Corrects the exposure of overexposed and underexposed areas of the scene. Drag
the slider to adjust the DWDR level. Click the – and + signs to make fine
adjustments.
SSA Automatically decreases the brightness of bright areas and increases the
brightness of dark areas according to the environmental lighting.
Note :
only for H4L6GR2 and HBL6GR2.
Click
Save
to apply the settings.
White Balance
White balance compensates for the different color temperatures of different light sources,
ensuring consistent colors- in the image.
In the White Balance area, you can set the white balance mode to Auto , Natural , Street
Lamp , Outdoor , Manual or Customize Region .
Auto White balance is adjusted automatically.
Natural White balance is optimized for natural lighting.
Street Lamp
White balance is optimized for yellow-tinted lighting.
Outdoor White balance is optimized for outdoor environments.
Manual Red gain and blue gain values are set by the user.
Customize Region White balance is applied to a user-defined area within the scene.
Click Save to apply the settings.
Day and Night
In the D&N Mode area, you can set the day and night mode,
sensitivity, and delay time.
By default, the camera automatically outputs color video or
black-and-white video depending on the amount of light in the scene. To output only color
video, set Mode to Color . To output only black-and-white video, set Mode to Black & White .
Sensitivity controls the sensitivity to lighting changes that cause the camera to switch
between day (color) and night (black-and-white) mode. Select Low , Medium , or High .
Delay defines the delay time before switching between modes. Select a value between 2s and
10s
.
Click Save to apply the settings.
IR Light
In the
IR Light
area, you can set the infrared LED mode and other settings.
Set Mode to Manual , Zoom Priority , Smart IR , or OFF .
Manual
：
IR near and far distance brightness are set by the user.
Zoom Priority
：
IR settings are adjusted automatically based on the zoom setting. Note : only for H4L6GR2
and HBL6GR2.
Smart IR
：
IR settings are adjusted automatically to prevent overexposure or underexposure.
If Mode is set to Manual , set the infrared LED brightness level. Drag the slider left or right
to decrease or increase the value. Click the – and + signs to make fine adjustments.
If Mode is set to Zoom Priority , set the IR Correction level to correct focusing problems
caused by bright IR light. Note : only for H4L6GR2 and HBL6GR2.