Installation
2/03
10260A Series Actuators – Installation, Operations, and Maintenance
19
Rod end, nut and bolt are
supplied with the actuator
1/2"-20 right-hand threads
1/2"-20 left-hand threads
Customer supplied nut and bolt
24 to 120 inches
Customer supplied pipe*
* cut to size
with
standard NPT both ends
a/n 23202
Figure 3-8 Pipe Linkage Kit
*
Pipe length = Overall linkage length minus (-) 17 inches (43 cm).
Actuator Crank Arms
The 10260A Series Actuator comes standard with a 5” crank arm (p/n 51309967-501) or an optional crank
arm adjustable 0”-12” (p/n 51452160-501).
The 10260A Series Actuator crank arm uses a standard ½” rod end to compliment the turnbuckle and pipe
linkage kits. The crank arm connects the link rod using a ½” rod end and a hex link rod adapter. For
applications which use a link rod, a link rod adapter is available is available as an option in the Model
Selection Guide.
1/2" Rod End
Link Rod Adapter
Link Rod
Set Screws
Insert the Link Rod Completely into the Link rod
Adapter and tighten the (2) set screws with
sufficient force to hold the link rod.
Figure 3-9 Standard 5” Crank Arm
