Honeywell HDZ20HD, User Manual

Page: 101 / 164

Configuring Alarms | 101
800-11873V4 - A - 07/2014
Setting a Motion Detection File Name
You can specify a file name format for images uploaded when the motion alarm is triggered.
Choose the format that best meets your requirements.
1. In the File Name field (see Figure 6-11 ), type a file name (
image . jpg
is the default file
name).
2. Select one of the following options for the file name format:
• Add date/time suffix to add the date and time in YYMMDD_HHMMSS format (for
example, image120428_034724 . jpg).
• Add sequence number suffix (no maximum value) .
• Add sequence number suffix up to [ number ] and then start over , and enter a
value in the number field.
• Overwrite to overwrite an older file with a new file with a static filename.
Saving the Motion Detection Settings
After you have configured the motion detection settings for one of the four motion detection
profiles, click
Save . Make sure to click Save before setting up another profile.
Save after you have configured all the motion detection settings for a motion detection profile.
See Selecting a Motion Detection Profile to Configure, page 95 , Setting the Motion Detection
Status, page 95 , Setting the Motion Detection Window, page 96 , Setting the Motion Detection
Sensitivity, page 97 , Setting the Motion Detection Actions, page 98 , and Setting a Motion
Detection File Name on page 101 for more information.
Network Failure Detection Settings
You can set up the camera to send an alarm notification when a network failure is detected. You
can send a message to an FTP or email server, or you can record a video clip to a storage
device.
Setting Up Network Failure Detection
1. Navigate to System

Events

Network failure detection (see Figure 6-16 ).
Note The network failure detection Detection Switch is set to Off by default.