64
IP Camera Web-Client
Alarm and Audio
Alarm Settings
Connect external devices such as sirens or flashing lights to the alarm output connector to
signal camera users that an alarm is activated. See
Connecting Alarms
on page
26
for more
information. Set the
Alarm Output
as
Normally Open
or
Normally Close
.
When alarm inputs are connected, the camera triggers an alarm only when the normal state
(open or closed) changes. An alarm message appears on the Web-Client screen (see
Figure
) to notify the operator.
Audio Settings
Your network camera supports bi-directional audio. There are two supported voice band
channels that function in full duplex mode. Connect industry-standard line level audio input
and output to the back of your camera. See
Connecting Audio
on page
26
for more
information.
Audio configuration for your network camera is straightforward.
Figure 4-16
Audio Settings
To listen to or capture audio from the camera, enable the
Camera to Client (PC)
check box
for the appropriate stream (
). To listen to audio from the client (PC), enable
the
Client (PC) to Camera
check box.
Summary of Contents for HD4MDIP
