Honeywell HD4MDIP, User Manual

Page: 33 / 78

HD4 EQUIP Series IP Dome Cameras User Guide
Document 800-05620 Rev C 33
04/10
Step 1: Confirm Your System Requirements
Note Windows administrator privileges are required to install the Honeywell IP
Utility and associated software.
Note Contact the network administrator if there are any questions regarding the
local area network (LAN) or any other network-related issues.
Install the Honeywell IP Utility on a work station with the minimum requirements (outlined
in
Table 3-2 ). After the IP Utility is installed, the same computer workstation can be used to
access the Web-Client.
Table 3-1 User Profiles for Honeywell IP Utility and the Web-Client
Interface Administrator Guest
Honeywell IP
Utility • View the list of available network devices
and connect to the devices.
• Configure the IP network settings.
• Upgrade firmware.
• Change the access passwords for the IP
Utility application.
• Change the access passwords for the
Web-Client application.
• View the list of devices available on the
network.
• View system settings including device
name, IP address, and MAC address.
Web-Client • View video and network settings.
• Configure compression settings.
• Configure camera setup.
• Configure video analytics.
• Configure audio and alarm setting ss.
• Guest users are limited to the Live View
tab, where they can choose to view
video from the primary or secondary
streams.