Honeywell HD273H User Manual Download Page 4

Page: 4 / 40

HD273H(X) Minidome Camera User Guide

800-18606 – A – 06/2014

Safety Instructions

These instructions are intended to ensure that users can use

the product correctly to avoid danger or property loss.

The precautions are divided into “Warnings” and “Cautions”.

Warnings:

Serious injury or death may occur if any of the

warnings are neglected.

Cautions:

Injury or equipment damage may occur if any of the

cautions are neglected.

Warnings

WARNING

: Installation and servicing should be performed only

by qualified and experienced technicians to conform to all local

codes and to maintain your warranty.

WARNING

: This device is configured for 24 V AC or 12 V DC

operation. Do not connect to a higher voltage. Use only with

NRTL approved Class 2 or LPS power supplies.

Warnings

these safeguards to

prevent serious injury

or death.

Cautions

Follow these

precautions to prevent

potential injury or material

damage.

Summary of Contents for HD273H









































Search results

Summary of Contents for HD273H

Reviews:

Related manuals for HD273H

Brands by name

Popular brands

Honeywell HD273H, User Manual

Search results

Summary of Contents for HD273H

Reviews:

Related manuals for HD273H

Brands by name

Popular brands