HCX Series Network IP Camera Operator Guide
Document 800-01794 Rev C
37
05/09
Setting E-mail Settings
Use the E-mail dialog box to configure e-mail notifications of trigger events.
Note
The domain name and mail server settings must be properly configured on
the Network Settings page for e-mail to operate properly.
time lapse
period
The time (in seconds) between regular periodic trigger events. 0
means there are no time lapse trigger events.
image size
Downsample (shrink) the image. Options are:
1 (1280 x 1024), default
1/2 (640 x 512)
1/4 (320 x 256)
1/8 (160 x 128)
For example, selecting 1/4 reduces the image to a fourth its
original width and height. Smaller images are processed and
transmitted more quickly.
Note
Downsampling does not increase the maximum frame
rate of the camera.
forced idletime
(sec)
The minimum time in seconds between trigger events. Your
camera will not trigger another event until the specified amount of
time elapses after the last post-trigger image.
# pre /
-post-trigger
images
The number of images your camera saves from each trigger
event.
Note
Your camera can store only a limited number of trigger
event images. This number depends on the size of your
images. Cropping or downsampling allows storage of
more images. Pre-trigger count plus post-trigger count
should not exceed 8. It is recommended that you test
(click
below the Status bar) to see that you
get the desired number of trigger images.
pre-/ -post
trigger interval
(sec)
The time, in seconds, between successive pre- and post- trigger
images.
Table 1-9
Trigger Settings Fields
Field
Description
