HCX Series Network IP Camera Operator Guide
Document 800-01794 Rev C
15
05/09
HCXFinder
The HCXFinder application is a Windows based IP address configuration tool. Every time
you launch HCXFinder it automatically detects any cameras on the local network. You can
then assign a unique IP address for each detected camera.
Installing HCXFinder
The HCXFinder application is located on the CD-ROM accompanying your HCX Series
camera. Double-click hcx_finder.exe to launch the Install Wizard. Honeywell recommends
that you check for the most current version on the product download center at
www.honeywellvideo.com
.
Assigning an IP Address
To assign an IP address to a detected network camera:
1.
Launch HCXFinder. All detected network cameras are listed.
Figure 1-1
HCXFinder List of Detected Cameras
2.
Highlight a camera in the list, then click Assign IP.
