Rev
1.01
3
Document
900.0418
10/06
Setting the Signal Format
Figure 3
Camera Rear View
Set the signal format switch (see
Figure 3
) to:
NTSC for North America
PAL for International
Connecting Monitor and Power
Note
Check the power source from the external
power supply before applying power to the
camera.
1.
Connect the VIDEO connector on the rear of the camera
to the video-in connector on your monitor.
2.
Connect the camera to a 12 VDC or 24 VAC power supply
(appropriate to your installation). Use a screwdriver to first
loosen the ~AC24V/DC12V terminal screws on the
terminal block.
Figure 4
Video Connections
Note
To ease installation, the terminal block can be
removed. The power connections of the
removable terminal block are not polarity-
sensitive. Connect either power lead to either
connector terminal.
3.
Secure the power leads by retightening the terminal
screws until snug.
Set signal format
LENS
ENTER
VIDEO
NTSC
PAL
+ -
12VDC
24VAC
RX
+
RX
-
Power LED
