Honeywell HCC-960 Series, Operation Manual

Page: 19 / 23

19
5.8.5 Image setting
Select IMAGE SETUP and press + or – button to enter
submenu. It will show as in Fig.5-14.
<< IMAGE SETUP >>
MIRROR OFF
D.ZOOM OFF
H.RES 6
SAVE & EXIT
RETURN
<Fig.5-14 Image Setup>
①
Mirror setting
MIRROR OFF

H.MIR

V.MIR

FLIP
②
Digital Zoom setting
To use this function, set D.ZOOM to ON and
exit OSD MENU pressing SAVE & EXIT.
Maximum zoom is up to x256.
UP button: ZOOM IN, DOWN button: ZOOM OUT
D.ZOOM OFF

ON
③
High Resolution level setting
H.RES OFF

1

…

8
<< NIGHTSHOT SETUP >>
DWELL 5
D2N LEVEL 5
N2D LEVEL 5
BURST OFF
COLOR B/W
SAVE & EXIT
RETURN
<Fig.5-15 Nightshot Setup>
5.8.6 Software Day & Night mode setting
The NIGHTSHOT SETUP allows to set the camera
reaction under low light illumination and switch mode
between Day and Night modes.
AUTO – Day and Night modes change by auto
detecting luminance.
ON – Night mode
OFF – Day mode
NIGHTSHOT OFF

AUTO>

ON
①
Dwell time setting
DWELL 1 ~ 30
②
Day to Night level setting
D2N LEVEL 0 ~ 10
③
Night to Day level setting
N2D LEVEL 0 ~ 10
④
Burst signal setting
BURST OFF

ON
⑤
Color setting
COLOR B/W

COLOR
Fig.5-15 is the submenu of NIGHTSHOT AUTO.
5.8.7 Factory Default
All changed settings are returned to shipping condition.
For Initialization, select “FACTORY”
and push + or - button.
☞
caution
1. Keep in mind that this mode reset all changed data
back to shipping condition.
2. Some menu such as LENS SEL, CAMERA ID, etc are
not initialized.