Device:
new search for headsets. The user can initiate the device query by
holding down the Plus (+) and Minus (-) buttons on the device. This
method is useful if the user’s device completes a cross pairing with
the wrong headset; the user can initiate another manual pairing.
Manual pairing must be enabled on the device for this procedure to
work.
From
VoiceConsole:
VoiceConsole displays all Bluetooth pairings including SRX3
headsets, Talkman devices, scanners, and printers. From the Edit
Device page, you can clear a pairing. You can do this with headsets
as well.
From an
SRX3
Headset:
The SRX3 headset user can break any pairing by pressing the Plus
(+) and Minus (-) buttons.
This is the preferred method for breaking a pairing.
If the paired device is running Vocollect VoiceCatalyst 1.2 and
newer, the SRX3 headset signals the device that the pairing is
being broken. With older versions of Vocollect Voice Software, the
pairing breaks only after it times out.
Headset Pairing FAQ
Q: My device accidentally paired with a different headset. What can I do?
A: If you are using an SRX3 headset, press the + and - buttons simultaneously to
clear the pairing.
Q: The users at my site do not have assigned headsets and devices, so they
could get a different headset at every shift. Which pairing process would you
recommend?
A: With an A700 or A700x device (VoiceCatalyst only) and an SRX3 headset, you
can use TouchConnect to pair the device and headset.
With earlier devices, auto pairing would probably be the easiest, as it will quickly
establish connections and by default does not maintain those pairings.
Q: The users at my site are assigned their own SRX3 headsets, so I want to
maintain pairings and avoid pairing headsets at the start of every shift. What
pairing process would you recommend?
A: You could use manual pairing or auto pairing with the configuration
parameter SrxPersistAutomaticPairing or, in VoiceClient 3.9 and later and
VoiceCatalyst 2.0 and later, PersistSrxPairingAcrossPowerCycle set to 1 and
SrxClearPairingInCharger set to 0 in order to maintain pairings through device
reboots and recharging.
Q: Our users are spending a lot of time pairing. What methods would you
recommend to reduce the time it takes to pair headsets?
41
SRX3 User Guide - Preliminary
Summary of Contents for HBT1500-01
Page 1: ...SRX3 Headset User Guide ...