Configuring the Camera | 7
800-15429 - A - 07/2013
Configuring the Camera
Using the OSD Joystick
The camera’s setup menus are controlled using the built-in OSD joystick located on the
underside of the camera.
Figure 1
OSD Joystick
Press down and hold the OSD joystick for two seconds to bring up the OSD menu on the
connected monitor.
OSD Joystick Commands
•
To move up or down through a list of menu options, push the joystick up
or
down
.
•
To enter a submenu (
) or to set a menu selection, press down on the joystick.
•
To change a menu setting, push the joystick left
or right
. If multiple options are
available, keep pushing the joystick left or right until the desired value/status is
displayed.
•
To exit a menu, push the joystick up or down until EXIT is selected, and then press
down on the joystick.
SET UP