2 | H34S-IC In-Ceiling Mount Quick Installation Guide
www.honeywell.com/security
Preparing the Camera
1. Loosen the two captive security screws on the dome cover using the supplied Torx key
and remove the dome cover from the camera base.
2. Remove the inner cover from the camera assembly. Press both sides of the inner cover to
release it from the camera assembly.
3. Remove the screw securing the camera assembly to the camera base using a Phillips
screwdriver (not supplied).
4. Remove the camera assembly from the camera base by pressing the tabs on the sides of
the camera assembly. Store the camera assembly in the product box while you attach the
camera base to the in-ceiling mount.
Note
For rugged cameras only:
There are two cable entry holes on the camera base. Install
the conduit plug in the hole you are not using.
Indoor Dome
Rugged Dome
Indoor Dome
Rugged Dome
Indoor Dome
Rugged Dome
