Performance Series IP Camera Software Configuration Guide
38
Parameter
Function
Interval
The interval for sending ranges from 0 to 3600 seconds. 0 seconds
means that there is no interval.
The system will not immediately send the email when the alarm occurs.
When an alarm, motion detection, or other event occurs to activate an
email, the system sends the email according to the interval that you have
specified here. This reduces the load on the email server when multiple
emails are triggered simultaneously.
Health Mail Enable
Select the check box to enable this function.
Update Period (interval)
This allows the system to send a test email to check the connection.
Select the check box to enable this function, and then set the
corresponding email interval.
You can set the Update Period so that the system sends out regularly
scheduled emails.
Email Test
The system will automatically send an email to test the connection.
Before you can do an email test, you must save the email setup
information.
UPnP
UPnP lets you establish the mapping relationship between the LAN and the public network. In the UPnP
configuration interface, you can add, modify, or remove a UPnP item.
Figure 5-17 UPnP Configuration Interface
Enabling UPnP in Windows
When UPnP is enabled in Windows, the camera can be detected automatically through
My Network
Places
.
Note
The UPnP is enabled by default on Windows 7 systems. This procedure
applies to Windows XP.
1.
Go to
Start
Control Panel
Add or remove programs
.
2.
Click
Add or remove programs
, and then select
Network Services
from the
Windows Components
Wizard.
