Performance Series IP Camera Software Configuration Guide
36
Table 5-11 Honeywell DDNS Configurations
Parameter
Function
Server Type
To enable
DDNS
, select the check box and choose the Honeywell DDNS server
from the drop-down list.
Server Address
The default server address iMode
Select
Auto
or
Manual
. The default is
Auto
. If you select
Manual
, then you must
enter a domain name.
Domain Name
Auto and self-defined domain names both follow the format
MAC
address
.hennvr-ddns.com. You can define the prefix.
Username
Optionally, enter the user name you use to log in to the server.
IP Filter
To restrict camera access to specific IP/MAC addresses, enable the IP filter. You can specify an IP
address or an IP address segment (for example, from 192.168.1.1 to 192.168.1.100). If you do not select
the check box to enable
Trusted Sites
, there will be no access limitation.
Figure 5-15 IP Filter Configuration Interface
To enable the IP filter:
1.
Click Add IP/MAC, enter the IP address(es) or IP address segments(s) that you want to allow, and
then click
Save
.
2.
Select the
Trusted Sites
check box.
Note
Trusted IP/MAC addresses must be added first before enabling
Trusted
Sites
.
Note
If you specify a MAC address limitation here, the computer with the
specified MAC address must be in the same network subnet as the IP
camera.
CAUTION
If you set up the IP Filter/Trusted sites options and forget the IP/MAC address that
is allowed to access the camera, you will have to return the camera to the factory to repair the
problem.
