GSMX Installation and Setup Guide
– 22 –
Registration
SUCCESS
If this is a new installation and the city, central station, and
customer numbers have been correctly entered, the GSMX
is registered and this message is displayed. The GSMX is
now in full service and available for alarm reporting to the
central station.
Possible Errors
Registration
BAD
Timed Out
Displayed if no response to the registration request is
received.
Registration
BAD
Pri Sub ID
BAD
Indicates the city, central station, or customer number for
the labeled account(s) is not accepted. The ID information
was either entered in error, or the central station failed to
pre-authorize programmed ID numbers with AlarmNet
customer service.
Registration
BAD
Pri ID –
Need PIN
Displayed if this is a repair/replacement, or an error was
made in programming the Primary account information of
GSMX for an existing account. This prompt appears for 2
seconds. See the
Replacing an existing module using
the programming tool
topic.
Replacing an existing module using the programming tool
Enter PIN#
This prompt appears after pressing the
down arrow [
↓
]
on
the 7720P. Enter a 4-digit alphanumeric PIN number
provided by your central station, your dealer or an
authorized AlarmNet representative.
Press the [ENTER] key.
Registering
…
The registration message is sent and the unit waits for
acknowledgement.
Registration
SUCCESS
If the PIN is valid, the new GSMX is registered and the old
unit unregistered. Additionally, AlarmNet sends a
substitution alarm to the central station.
Registration
BAD
If you entered an invalid PIN, the appropriate message is
displayed depending on which account number is being
replaced (see above for exact wording). The registration
process is repeated.
NOTE:
Each attempt causes a substitution alarm to be
sent to the central station.
Summary of Contents for GSMX
Page 30: ...NOTES ...
