Honeywell FUSION User Manual Download

Page: 113 / 168

PAN

/ TILT / ZOOM

7–11

7.6

PTZ STATUS ON CLOSE

The

PTZ Status on Close

is an option that defines the default settings for a PTZ

camera when the controller is not open. This includes activating a Tour, moving to a
preset position or simply leaving the camera as it.

Stay Put

This option leaves the PTZ in its present state.

Start Tour

Starts the Pre-Defined Tour function when the on-screen PTZ
controller is closed. The Tour that will be activated will be the Tour
that is selected.

Go To Preset

Moves to a Selected Preset position when the on-screen PTZ
controller is closed.

7.6.1 ACTIVATING THE PTZ STATUS ON CLOSE OPTION

1. Start by creating a Preset or Tour for the selected camera.

Select

either

Start Tour

Go To Preset

Press

APPLY

to save.

Summary of Contents for FUSION









































































































































































Search results

Summary of Contents for FUSION

Reviews:

Related manuals for FUSION

Brands by name

Popular brands

Honeywell FUSION, User Manual

Search results

Summary of Contents for FUSION

Reviews:

Related manuals for FUSION

Brands by name

Popular brands