manualshive.com logo in svg

Honeywell FUSION, User Manual

Share
Download
Honeywell FUSION User Manual Download Page 111

PAN 

/ TILT / ZOOM 

7–9 

 

7.5 

UNDERSTANDING TOURS, CONTINUED 

7.5.1  CREATING A PRESET TOUR 

 

1.  Start by creating two or more Preset Positions. (refer to Section 7.4.1) 

 2. 

Select 

the 

Preset Tour

 Method. The Preset Tour is now the default Tour method.  

 

3.  The Tour is now set to cycle through the defined presets. 

 

7.5.2  VIEWING THE PRESET TOUR 

 

1.  From the Main Display Screen, select the PTZ option. 

 

2.  Select the PTZ camera of the Tour you just created.  

 

3.  Press the Tour Button. The Preset Tour will activate.  

 

7.5.3  CREATING A PRESET TOUR2 

 

1.  Start by creating two or more Preset Positions. (refer to Section 7.4.1) 

 2. 

Select 

the 

Preset Tour2

 Tour Method. The Preset Tour is now the default Tour 

method. 

 

3.  The Tour is now set to cycle through the defined presets at the specified Travel 

Speed and Dwell Time defined by the preset tour that is selected in the PTZ setup 
menu.  

 

 

7.5.4  VIEWING THE PRESET TOUR2 

 

1.  From the Main Display Screen, select the PTZ option. 

 

2.  Select the PTZ camera of the Tour you just created.  

 

3.  Press the Tour Button. The Preset Tour2 will activate.  

Summary of Contents for FUSION









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands