Honeywell F200 Specifications Download Page 2

F200 CHARGED-MEDIA AIR CLEANER

68-0238EF—03

2

ORDERING INFORMATION

When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the 

TRADELINE® Catalog or price sheets for complete ordering number.

If you have additional questions, need further information, or would like to comment on our products or services, please write or 

phone:

1.

Your local Honeywell Automation and Control Products Sales Office (check white pages of your phone directory).

2.

Honeywell Customer Care

1885 Douglas Drive North

Minneapolis, Minnesota 55422-4386

In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Toronto, Ontario M1V 4Z9.

International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France, 

Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.

SPECIFICATIONS

IMPORTANT

The specifications in this publication do not include 

normal manufacturing tolerances; therefore, an indi-

vidual unit may not exactly match the listed specifica-

tions. This product is tested and calibrated under 

closely controlled conditions, and some minor differ-

ences in performance can be expected if those con-

ditions are changed.

Model:

F200E Charged-Media Air Cleaner includes a cabinet, access 

door and pleated media filter, and an RF AIRWATCH® 

Indicator.

Application:

Use with gas, oil, and electric forced warm air furnaces and 

with compressor cooling. Can be used with heat pumps if filter 

is changed regularly to prevent excessive pressure drop. 

Efficiency:

Efficiency Ratings: Based on American Society of Heating, 

Refrigerating and Air-Conditioning Engineers Standard 52.2-

1999. Efficiency ranges are defined for small particles, E1=0.3 

to 1.0 microns; medium particles, E2=1.0 to 3.0 microns; and 

large particles, E3=3.0 to 10.0 microns.

Initial Efficiency:

E1=66%

E2=91%

E3=98%

Minimum Efficiency Reporting Valve (MERV): 13 at 492 fpm.

Filter Media:

 Pleated for greater media capacity.

Filter Element:

 Underwriters Laboratories, Inc.: UL 900, 

Class 2 Listed.

Pressure Drop:

 See Fig. 3. 

Initial Pressure Drop:

 0.28 in. wc at 492 fpm.

Temperature Rating:

 -40° to +140°F (-40° to +60°C).

Dimensions:

 See Fig. 1.

Mounting:

Mounts in any position in the return air duct, usually next to 

the furnace blower compartment. Cabinet is sturdy enough to 

support weight of a residential furnace and evaporator coil.

Upgrade Path:

The F200 uses the same cabinet as the F300 Electronic Air 

Cleaner. Upgrade may require installing the cell key, 

electronic cells, protective screens and installation and wiring 

of the power box, depending on model.

Summary of Contents for F200





















Reviews: