- 4 -
Standard Method of Installation
Figure2.
To install this system, please refer to Figure2 and do the following steps.
1. Fix this system with M8 x L30mm stainless steel bolts(
①
for installation on the wall or
②
for installation on
the floor), Nuts and flat/Spring washers which are supplied.
* The install bolts location of
①
can be selected as the install environment of up or down location.
2.
③
Open the capacity of water tank and inject water* until 4L and fit to the case.
Methods of Installation
* The liquid shall be used an antifreeze to endure below zero temperature
-
20
℃
~ 0
℃
.
③
①
②
①
