44
evotouch
Deactivating the RF communication check
Remove and re-insert the batteries of the DT92.
f
or
Disconnect the power supply.
f
or
Press the bind button.
f
Completing configuration
Press the DONE button.
f
Configuration of the HCW82 / HCF82 is completed.
Binding the evotouch controller to the HB85 temperature sensor
4.10
Binding procedure
4.10.1
i
To check whether the radio connection is ready for later operation, during binding the temperature sensor module
should remain as near as possible to the mounting site.
Follow the guided or expert configuration until the
f
following screen appears.
Press the bind button (1) on the HB85.
f
Binding takes place automatically.
i
Binding is terminated automatically after 4 minutes.
i
After successful binding, the HB85 transmits the
measured data to the
evotouch controller at intervals
of approx. 10 minutes.
Summary of Contents for EVOTOUCH CONTROLLER
Page 1: ...1 Application Manual ...
Page 46: ...46 evotouch ...
Page 47: ...Application Manual 47 ...
