18
Panel Test
This menu option performs various tests on the panel in line with BS5839 pt 9 2011.
There are four sub menus.
Panel test
Back
>Battery test
Define outstation
Outstation ring
Test indicators
Battery Test
This menu option performs a battery test when requested. The menu shows the current state of the PSU and the battery. Both the
battery present test and the battery high impedance test are performed automatically (every 15 seconds, and every 3 hours
respectively). However, this menu allows both battery tests to be performed on demand. Typically this is performed when the
batteries have just been added or changed.
Battery test
Mains: OK
Batt : OK
Action>Quit
Press up or down to toggle between
Quit
and
Retest
. Press TICK to select that action.
Define Outstation
This menu option will set all outstations to present. This does not permanently save all outstations as present. This is used for
testing purposes only.
Define all handsets
Master>No
Slave:No
:Next
Outstation Ring
This menu option will cause all outstations to ring, for single engineer testing of a system. When an outstation is picked up it is
recorded in the call log.
Define all handsets
Master>Start
Slave:No
:Next
Test indicators
This menu will sound the buzzer, and will flash all panel LEDs, except for the green power LED.
Test indicators
>Quit
www.acornfiresecurity.com
www.acornfiresecurity.com
