EchoView User’s Guide
30
8.4.
Peak Value Reading For Online Or Offline Monitors
The peak value reading from monitors on the network can be viewed anytime. Scroll down to the
instrument and select it. If the monitor is currently offline, its last received peak reading is shown.
This value is retained until communication with the monitor is restored.
To view a monitor’s peak reading:
1.
Press [Y/+] or [N/-] to scroll through the list of monitors. Then press [MODE] to select the
highlighted monitor.
The monitor’s type and status are shown (A = Alarm, R = Real-time Reading):
2.
Press [N/-] to advance through the sensor’s information (L = Low Alarm, H = High Alarm):
3.
Hold the [Y/+] key for 3 seconds, and the peak value is shown (P = Peak, A = Alarm Status):
To continue with readings, press [Y/+] or [N/-]. To exit, press [MODE].
8.4.1.
Clearing Offline Monitors
At the main screen, press the [Y/+] key for 3 seconds. This clears all offline monitors.