manualshive.com logo in svg

Honeywell Dolphin 99 EX, User Manual

Share
Download
Honeywell Dolphin 99 EX User Manual Download Page 141

12 - 5

Bottom Panel

For details on how to mount the HomeBase, see 

Mounting the HomeBase

 on page 

12-9.

Power

The base requires 12 Volts DC input for communications, battery charging, and power output to the 
terminal; the power adapter included with the base converts the voltage from the AC power source to 
12 Volts DC. Use only a UL listed power supply, which has been qualified by Honeywell, with output rated 
at 12VDC and 3 amps with the device. The operating temperature range is -10° to 50°C (14° to 122°F).

Honeywell recommends that you leave the base connected to its power source at all times, so that it is 
always ready to use.

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell 
peripherals, cables, or power adapters may cause damage not covered by the warranty.

Connecting Power to the HomeBase

1.

Plug the A/C power cord into the power adapter. 

2.

Plug the power cable into the power connector on the back of the HomeBase.

3.

Plug the A/C power cord into a grounded power source. The base is now powered. The Power/Dock 
LED on the HomeBase illuminates solid red to indicate the HomeBase has power and no terminal is 
docked.

Compliance Label

Serial Number Label

!

Power Cable

A/C Power Cord

Power 
Adapter

Summary of Contents for Dolphin 99 EX







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands