manualshive.com logo in svg

Honeywell Dolphin 99 EX, User Manual

Share
Download
Honeywell Dolphin 99 EX User Manual Download Page 138

12 - 2

Communications

Reliable data communications at speeds of up to 115K baud can be transmitted by the base through the 
RS232 serial port. Using the Hi-Speed USB port, the data transmission rate goes up to 480 Mbps. 

These bases cannot be physically connected to each other - sometimes referred to as “daisy-chained”.

Convenient Storage 

The intelligent battery charging system makes this base a safe and convenient storage receptacle for 
your Dolphin terminal. 

Capacity

The base holds one terminal and features an auxiliary battery well behind the terminal well that can 
charge a battery pack independently of the terminal well. This means that one base can charge two bat-
tery packs: the one installed in the terminal and a spare. 

We recommend use of Honeywell Li-ion or Li-poly battery packs. Use of any non-Honeywell battery may result 
in damage not covered by the warranty.
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell 
peripherals, cables, or power adapters may cause damage not covered by the warranty.    

Parts and Functions

Front Panel 

Terminal Well 

Place the terminal in this well to communicate with a host device, power the terminal, and 
charge the installed battery pack. The base completely charges the main battery in a Dolphin 
terminal in 4 hours for the standard battery or 6 hours for the extended battery. If the host 
device is a workstation that uses ActiveSync, synchronization begins immediately. 

!
!

Power/Dock LED

Auxiliary Battery Well

AUX Battery LED

COMM LED

Terminal Well

Summary of Contents for Dolphin 99 EX







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands