manualshive.com logo in svg

Honeywell Dolphin 7800, User Manual

Share
Download
Honeywell Dolphin 7800 User Manual Download Page 40

3 - 12

Batteries

There are two types of battery power: the main battery pack installed in the back panel and the backup 
battery located inside the terminal. They are designed to work together to prevent data loss when the 
terminal is in use over long periods. 

Both batteries must be completely charged before using a Dolphin terminal for the first time!

 

Main Battery Pack

We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in 
damage not covered by the warranty.  

Dolphin 7800 model terminals are designed for use with standard battery pack model 7800-BTSC (Li-ion 
3.7 V, 8.9 watt hour) and extended battery pack models 7800-BTXC and 7800-BTXCW (Li-ion 3.7 V, 
14.8 watt hour) manufactured for Honeywell International Inc.

Charging Options

When the main battery pack is installed in the terminal, use one of the following peripherals:

•

Dolphin 7800 HomeBase Device (Model 7800-HB)

 (see page 12-1)

•

Dolphin 7800 eBase Device (Model 7800-EHB)

 (see page 13-1)

•

Dolphin 7800 Mobile Base Device (Model 7800-MB)

 (see page 14-1)

•

Dolphin 7800 ChargeBase Device (Model 7800-CB)

 (see page 15-1)

•

Dolphin 7800 Net Base Device (Model 7800-NB)

 (see page 16-1)

When the main battery pack is not installed in the terminal:

• Place the battery pack in the 

Dolphin 7800 QuadCharger Device (Model 7800-QC)

 (see page 17-1)

• Place the battery pack in the 

Auxiliary Battery Well

 of the 

Dolphin 7800 HomeBase Device (Model 

7800-HB)

 (see page 12-1) or 

Dolphin 7800 eBase Device (Model 7800-EHB)

 (see page 13-1). 

For information on how to remove the main battery pack from the terminal, see 

Replacing the Main 

Battery Pack

 on page 

2-4.

Charging Time

The standard battery pack requires 4 hours to charge completely before initial and the extended battery 
pack requires 6 hours to charge completely before initial use.

Honeywell recommends charging the Dolphin terminal for at least 24 hours prior to initial use to ensure 
the internal backup battery is fully charged.

Battery Error Notification

If your terminal displays the following indicators, replace the main battery pack with a Honeywell Li-ion 
7800 standard or extended battery pack. For information on how to remove the main battery pack from 
the terminal, see 

Replacing the Main Battery Pack

 on page 

2-4.

•

 appears in the Title bar at the top of the touch screen.

• The General Notification LED flashes red.
• A Notification appears on the Tile bar at the bottom of the touch screen.

!

Summary of Contents for Dolphin 7800



















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands