Honeywell Dolphin 6110 User Manual Download

Page: 11 / 114

2 - 1

Getting Started

Out of the Box

Verify that your carton contains the following items:
• Dolphin 6110 mobile computer (the terminal)
• Battery pack (3.7v, Li-Ion)
• AC power supply

(KSAS0100500200D5; Input: 100-240V AC, 50/60Hz 0.4 Amps; Output: 5 Volts DC, 2.0 A)

• Localized plug adapters

Note: Be sure to keep the original packaging in case you need to return the Dolphin terminal for service; see

Customer Support

on page

13-1.

Initial Setup for Dolphin 6110 Terminals

Step 1. Install the Battery

The Dolphin 6110 is shipped with the battery packaged separate from the unit. Follow the steps below to
install the battery.
1.

Release the strap making it convenient to reach the cover.

Remove the battery compartment cover by turning the cover locks upward and removing the cover.

Insert the battery into the battery well with the labels facing upward.

Replace the cover with a hinging motion and turn the locks downwards.

Note: The battery door must be installed prior to booting the unit.

Replace the hand strap.

Cover Locks

Battery

Summary of Contents for Dolphin 6110



















































































































Search results

Summary of Contents for Dolphin 6110

Reviews:

Related manuals for Dolphin 6110

Brands by name

Popular brands

Honeywell Dolphin 6110, User Manual

Search results

Summary of Contents for Dolphin 6110

Reviews:

Related manuals for Dolphin 6110

Brands by name

Popular brands