Honeywell CIU 888 Migration Manual Download

Page: 42 / 110

Commissioning of a Standalone System Setup

Ensite Pro to CIU 888 Migration Manual

Part No.: 4417593_Rev09

2 - 16

CIU 888

$*6

3. Configure the additional configuration settings.

4. Click

Update

to update the additional configuration settings.

Site

Element

Type

Parameter

Name

Description

Value Range

Default

Value

CIU

Priority Agent

Indicates whether Priority Agent is enabled or dis

abled.

Priority Agent is disabled - CIU 888 scans the field

using a static time based scanning algorithm for

foreground and background scan items. No priority

changes happen based on Product movement and

Tank High Monitoring Limit.

Priority Agent is enabled - CIU 888 scans the field

using a dynamic time scanning algorithm based on

the Product movement and Tank High limit. Rela

tive scan priorities are done between static tanks

(tanks with no product movement), dynamic tanks

(tanks with product movement), dynamic tanks in

which product level is beyond the configured Tank

high monitoring limit, Tanks with field device com

munication errors.

See Chapter B section B.6 for Priority Details.

Enabled

Disabled

Enabled

HostPort

TRDT Sup

press Moving

Status

Indicates whether Moving status is suppressed or

not in the CIU888's Modbus Tank record.

Enabled - Moving status suppressed

Disabled - Moving status suppressed

Enabled

Disabled

Tank

HighLevelMoni

toringLimit (%)

Indicates the configured % of Tank capacity. CIU

888 scans product level with a higher frequency if

Product level crosses the configured % of Tank

capacity.

double value

Flexcon

Flexcon address of the gauge.

0-1899

GPU

Cache

GPU Cache

For emulation requests, will this data be received

from cache or directly from the field.

Enabled

Disabled

Enabled

VPN Port

IP Address

IP address of VPN port

Valid IP address

192.168.5.1

VPN Port

IP Address

IP address of partners VPN port in case of redun

dant configuration. This field is not used in case of

non redundant configuration.

Valid IP address

192.168.5.2

VPN Port

Subnet Mask

Input valid subnet for VPN port

Valid Subnet

255.255.255.0

Summary of Contents for CIU 888















































































































Search results

Summary of Contents for CIU 888

Reviews:

Related manuals for CIU 888

Brands by name

Popular brands

Honeywell CIU 888, Migration Manual

Search results

Summary of Contents for CIU 888

Reviews:

Related manuals for CIU 888

Brands by name

Popular brands