manualshive.com logo in svg

Honeywell Captuvo Series, User Manual

Share
Download
Honeywell Captuvo Series User Manual Download Page 98

5 - 50

Aztec Code

< Default All Aztec Code Settings >

Aztec Code On/Off

Aztec Code Message Length

Scan the bar codes below to change the message length.  Refer to 

Message Length Description

 (page 5-2) for additional information.  Mini-

mum and Maximum lengths = 1-3832.   Minimum Default = 1, Maximum 
Default = 3832.

Aztec Code Page

Aztec Code pages define the mapping of character codes to characters.  If 
the data received does not display with the proper characters, it may be 
because the bar code being scanned was created using a  code page that 
is different from the one the host program is expecting.  If this is the case, 
scan the bar code below, select the code page with which the bar codes 
were created (see 

Code Page Mapping of Printed Bar Codes

 on page A-6), 

Off

* On

Maximum  Message Length

Minimum Message Length

Summary of Contents for Captuvo Series





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands