Honeywell Captuvo Series, User Manual

Page: 32 / 148

2 - 10
each read. The sled attempts to find and decode new symbols as long as the
trigger is pulled. When this programming selection is turned
Off , the sled will
only read the symbol closest to the aiming beam.
Default = Off.
No Read
With No Read turned On , the sled notifies you if a code cannot be read. If using
an EZConfig Tool Scan Data Window (see page 9-3 ), an “NR” appears when a
code cannot be read. If No Read is turned Off , the “NR” will not appear.
Default = Off.
If you want a different notation than “NR,” for example, “Error,” or “Bad Code,”
you can edit the output message (see
Data Formatting beginning on page 4-1).
The hex code for the No Read symbol is 9C.
On
* Off
On
* Off