manualshive.com logo in svg

Honeywell Captuvo Series, User Manual

Share
Download
Honeywell Captuvo Series User Manual Download Page 51

5 - 3

Codabar

<Default All Codabar Settings>

Codabar On/Off

Codabar Start/Stop Characters

Start/Stop characters identify the leading and trailing ends of the bar code. 
You may either transmit, or not transmit Start/Stop characters.  
Default = Don’t Transmit.

Codabar Check Character

Codabar check characters are created using different “modulos.”  You can 
program the sled to read only Codabar bar codes with Modulo 16 check 
characters. 

 Default = No Check Character.

No Check Character

 indicates that the sled reads and transmits bar code 

data with or without a check character.

When Check Character is set to 

Validate and Transmit

, the sled will only 

read Codabar bar codes printed with a check character, and will transmit 
this character at the end of the scanned data.

* On

Off

Transmit

* Don’t Transmit

Summary of Contents for Captuvo Series





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands