11.
Force Calibration Enabled (optional)
If the Force Calibration option is enabled in Safety Suite Device Configurator (SSDC) and
a sensor is past due, the sensor(s) must be calibrated to continue and enter normal
operation.
Press
to acknowledge. Refer to See "Calibration Procedure" on page
more information. to begin calibration. If
is not pressed to enter calibration
within 2 minutes, the detector automatically deactivates.
12.
Cal IR Lock Enabled (optional)
If the Cal IR Lock option is enabled in Safety Suite Device Configurator (SSDC), the
following screen displays.
If IR LOCK ENABLED is enabled, the sensor(s) must be calibrated using the IR
Link or
an IntelliDoX docking station.
For more information, refer to See "Device Configuration" on page
information. in User Options.
13.
Bump Test
Note: BW Technologies by Honeywell recommends to bump test the sensors before each
day’s use to confirm their ability to respond to gas by exposing the detector to a gas
concentration that exceeds the alarm setpoints.
If Previous Bump Failed
If the last bump test performed was unsuccessful, the following screens display.
BW MaxXT II
23
User Manual
Summary of Contents for BW MaxXT II
