Honeywell BW Icon, User Manual

Page: 11 / 36

Common Button Operations
Feature Operation
Power On 4-second hold
Power Off 4-second hold
Enter or Exit menu Double-Press
Switch Menu (bump, cal, & BLE) Single-Press
Initiate selected 3-second hold
Acknowledge latched alarm 1-second hold
Bluetooth Pairing
The user can pair the Honeywell BW™ Icon to a mobile device via built-in Bluetooth Low Energy
(BLE). The Honeywell Device Configurator app, installed on the mobile device, can then show
gas readings and alarms from the BW Icon unit that is connected.
Readings and alarms can then be sent to Honeywell remote monitoring software
On the Honeywell BW™ Icon, the Bluetooth connection is on by default.
1. Turn On the BW Icon.
2. In your mobile device, open the Device Configurator app
3. In your BW Icon:
l
Double press to enter the menu
l
Single press until the BLE icon is displayed
l
Hold press 3 secs to initiate the pairing mode.
4. In the Device list screen from the Device Configurator app, select the BW Icon Serial
Number to start pairing.
Calibration
Perform a calibration to adjust the sensitivity levels of sensors and ensure accurate responses to
gases.
The detector can be calibrated in two ways:
• Apply gas from a cylinder to the sensors manually through the calibration cap, and using the
Safety Suite Device Configurator (SSDC) software or the Device Configurator (DC) app.
• Use an IntelliDoX module.
BW Icon 10 User Manual